SCT

Performance Autosport can custom tune your car according to your modifications through the mail with our SCT software.

The XCalibrator and XCal2 flash tools will not only find the most power in your engine combo, but it will also take the place of multiple products. The SCT XCalibrator takes the place of a timing adjuster, MIL eliminators, and a Speedcal, to correct your speedo when changing rear end gears. This can all be taken care of in one simple tuning tool.

• Increases Horsepower, Torque, Gas Mileage & Throttle Response
• Pre-Programmed with up to 3 Custom Calibrations specifically for your vehicle
• Retains Factory Calibration for easy restoration back to the stock calibration
• Easy installation. No tools necessary
• Easy to use push button & LED interface
• Quickly Flashes PCM via OBD-II diagnostic port

Some of the options available through the SCT XCalibrator:

• Raise rev limiter
• Raise speed limiter
• Shut off rear 02 sensors – for off road pipes
• Shut off EGR Valve
• Correct speedometer for gear changes and different tire/wheel sizes
• Install a 2 step rev limiter (‘99+)
• Fix “Drive-by-wire” issues with 2005 Mustangs
• Firm transmission shifts for automatics
• Permanently disable traction control
• Lean or richen fuel mixture
• Add or decrease ignition timing
• Adjust 02 settings for Long Tube headers
• Cooling fan settings
• Enormous Horsepower and Torque gains for Diesel trucks!
• Etc…

The SCT XCalibrator supports the following vehicles:

• 2000-2005 Focus
• 1996 - 2005 Mustang
• 1996 - 2005 F150 - F550 3.8L / 4.6L / 5.4L / 6.8L Gasoline
• 1996 - 2005 F150 - F550 7.3L / 6.0L Diesel